One notable absence from the Yamaha PSR-S970 design is the “SSP2” integrated circuit (IC) which handles vocal harmony processing. The SSP1 and SSP2 appeared in the Tyros series and PSR series coincident with Vocal Harmony 2.

For you signal sleuths, the PSR-S950 and Tyros 5 microphone input is routed to an analog-to-digital converter (ADC) where the analog signal is sampled and digitized. The digital sample stream is sent to the SSP2 IC. The firmware munges on the samples and voila, the SSP2 produces a vocal harmony signal that is mixed with samples from the tone generator, etc. The SSP2 sends its results to the TG where effects and mixing are performed. The TG sends its output to the digital-to-analog converters (DAC) and digital amplifiers. The Tyros 4 has the same signal flow using an earlier model “SSP1” processor instead.

Previous machines with vocal harmony (e.g., Tyros 3 and earlier, PSR-S910 and earlier), routed the digitized microphone stream to a tone generator (TG) IC such as the SWP51L. Presumably, vocal harmony processing was performed in the TG IC. With the brand new SWP70 tone generator in the S970, the digitized microphone stream is sent to the SWP70. Looks like vocal harmony processing is folded into the SWP70 TG.

I didn’t give the SSP2 much thought or investigation, and just assumed that it was a gate array or something. On inspection, the pin-out resembles a Renesas embedded DSP processor with analog inputs and outputs, digital I/O, USB and all of the usual suspects. The SSP2 in the S950 has 2MBytes of NOR flash program ROM (organized 1Mx16bits) and 2MBytes of SDRAM (organized 1Mx16bits). The clock crystal is a leisurely 12.2884MHz although the SDRAM read clock is 84.7872MHz.

Mysteriously, a web search on the part numbers doesn’t turn up much information. The part numbers are:

    Schematic ID  Manufacturer?       Yamaha
    ------------  ------------------  --------
    SSP1          MB87S1280YHE        X6363A00
    SSP2          UPD800500F1-011-KN  YC706A0

The PSR-S950 parts list does not give a Yamaha order number for the SSP2. If the SSP2 fails, you’ll need to call Yamaha 24×7 directly.

A web search does turn up a few of the interesting places where the SSP has been seen. In addition to Tyros 4, Tyros 5 and S950, the SSP and SSP2 are featured in:

    PSR-S500 arranger (probable role: effects processor)
    EMX5016CF mixer (role: SPX effects and user interface)
    Steinberg UR22 audio interface
    Steinberg MR816 Firewire audio interface
    Yamaha THR modeling guitar amplifier

The SSP is Yamaha’s designated hitter when they need an odd bit of DSP work done.