First glance at Genos voices

Posted on October 25, 2017 by pj

The Yamaha Genos™ Reference Manual and Data List PDF files are now available. Please see your local Yamaha support site.

When I check out a new keyboard, I ask, “What’s truly new and what’s recycled?” The Genos breaks new territory and draws heavily on new Montage waveforms, as well as recycling the good stuff from Tyros 5. Now that the waveform memory barrier is broken, Genos includes all of the Tyros 5 legacy stuff, adopts many waveforms from Montage, and gives many voices a major boost to Super Articulation 2 (SArt2).

Many of the T5 voices are renamed in Genos. One needs to compare the MSB, LSB and program change numbers across models. Renaming drives me crazy! The Telecaster guitar voices now begin with the prefix “50s,” and presumably, the new Stratocaster guitar begins with the prefix “60s.” I guess the Gibson SG is next to be sampled. 🙂

I have to warn you that my analysis reflects my own musical interests and needs: mainly liturgical music and funk. If you’re looking for pads, synths, etc., there aren’t the droids you’re looking for.

First, the major stuff recycled from Tyros 5:

Seattle strings (now explicitly identified as such)
Electric piano “body” waveforms.
Flamenco guitar
Telecaster guitar (now renamed “50s”)
Celtic violin
Orchestra horns, trumpets and trombones (sections)
Classical flute and clarinet

Please don’t consider “recycled” as a negative criticism. These instruments are all quite good.

Now the stuff from Montage:

CFX acoustic grand
CP80 electric grand
Electric piano ambient noises
Scottish accordeon
Steel acoustic guitar (Gibson)
D folk guitar (Martin D45)
Bass trombone
Oboe and bassoon

Voices that did not make the jump to hyperspace are: euphonium, piccolo trumpet, contra bassoon, Celtic harp. I’m still trying to sort out solo French horn. If these voices are critical to you, I guess you’re buying a Montage.

The Wurlitzer electric piano might have gotten a touch up. I won’t know until I play the Genos. The Montage Wurli included ambient noises. For some reason, The Yamaha euphemism for “Wurlitzer” is “70sVintage”. Arg, I hate this naming nonsense.

Let’s move on the totally new stuff:

C7 acoustic grand
Kino strings (sections, spicatto, tremolo)
Stratocaster guitar (prefix “60s”)
Resonator guitar
Ukelele
Mandolin
Pedal steel guitar
Active bass fingered and picked (Stringray bass)

There are other new voices like accordions and such.

Woodwinds, in general, appear to have gotten a major update. Many of the voices are now SArt2. I’m very happy to see SArt2 oboes since I use oboe (and flute) in many exposed lines. I’m also glad to see SArt2 funk alto sax and baritone sax.

If you are a songwriter or composer and need strings, look no further. You have choice between two very able and tricked out string “packages:” Seattle and Kino. The Seattle strings first appeared in Tyros 5 and then were heavily promoted during the Montage launch. Kino strings are an all new addition. Genos offers solo cello voices, too. Yeah!

That’s my preliminary analysis. Genos is checking off a lot of my boxes and criteria for a new ax. More to come as I dig deeper.

Motif XF          Montage             Genos
----------------  ----------------    ----------------  
CF3               CFX                 CFX
S6                S700
                                      C7
EP 1-3            EP 4
                  Rd                  70sSuitcase
                  Rd73
                  Rd78
                  Rd Noise            70sSuitcase
Wurli EP          Wr 1-3              70sVintageEP
                  Wr Noise
Clav 1-4          Clav 5              Clavi/ClaviFunk T5
                  Clav Noise
                  Upright             UprightPiano
CP70              CP80                CP80 ElectricGrand
                  CP80 KeyOff
Vibraphone 1-2    Vibraphone 3        Vibraphone T5
                  Motor Vibes
Pipe Organ 1-5
                  Tone Wheel 1-6
                  SctAcc Musette      ScottishAccordeon
Nylon 1           Nylon 2
                  Flamenco            FlamencoGuitar T5
                  Steel 2-3           SteelAcoustic, D-FolkGuitar
                  Telecaster (TC)     50sVintageStage T5
Acoustic Bass 1   Acoustic Bass 2
Violin 1          Violin 2 1st        Orchestral 1stVln T5
                  Violin 2 2nd        Orchestral 2ndVln T5
Viola 1           Viola 2             OchestralViola T5
Cello 1           Cello 2             OrchestralCello T5
Contrabass 1
                  US Strings          SeattleStrings T5
                  Violins 1st         Seattle1stViolins T5
                  Violins 2nd         Seattle2ndViolins T5
                  Violas              SeatleViolas T5
                  Cellos              SeattleCellos T5
                  ContBasses          SeattleBasses T5
                  CelticHarp
                  Celtic Violin       CelticViolin SArt2 T5
Trumpet 1-2       Trumpet 3           ClassicTrumpet SArt2 T5
                  Piccolo Tp
Trumpet Mute                          MuteTrumpet SArt2 T5
Soft Trumpet                          SoftTrumpet SArt2
Trombone 1-2      Trombone 3          ClassicTrombone T5
                  Bass Trombone       BassTromTenuto
                  Euphonium
French Horn 1     French Horn 2
French Horns 1    French Horns 2-3    OrchHorns T5
                  Trumpets 1-2        OrchTrumpets T5
                  Trombones 1-2       OrchTrombones T5
Soprano Sax 1-3                       BalladSopranoSax T5
Alto Sax 1-3                          AltoSax SArt2
Tenor Sax 1-2                         TenorSax SArt2
Clarinet 1        Clarinet 2-3        Clarinet SArt2
Oboe 1-2          Oboe 3-4            Oboe SArt2
Bassoon 1         Bassoon 2-3         Bassoon SArt2
Flute 1-2         Flute 3-4           ClassicalFlute SArt2 T5
                  CBassoon 1-2
Piccolo 1-2       Piccolo 3-4

Note :T5" means "Added in T5 and included in Genos"

Genos and the future of Montage

Posted on October 20, 2017 by pj

A member of the Yamaha Synth forum asked me for some thoughts about the future of Montage given what we know about Yamaha Genos™. Here is my reply with a few additions.

What’s in the future?

I tend to think about the Genos and Montage as brother and sister in the same way that Tyros and Motif are brother and sister. Different, but they share the same technological DNA and a lot of the same musical DNA (waveforms and voices).

Since the two flagship products are on different development schedules, they tend to leap frog each other with respect to new waveforms and voices. This was certainly true over the 10+ year history of the Motif and Tyros product lines.

I’m now calling this my “Leapfrog hypothesis.” It’s a hypothesis because I don’t have any privileged knowledge of Yamaha’s development process. (I wish I did, but then, I’d be under NDA and couldn’t tell you. 🙂 ) I started thinking about this last year and if you’re interested, please read about it here.

The hypothesis is based on clues from Martin Harris, one of Yamaha’s key developers. The Montage, for example, adopted the much-promoted Seattle strings and Telecaster guitar from the Tyros 5. In return, the Genos has adopted the CFX acoustic piano, electric piano ambient noises and other waveforms from the Montage. Other examples of lateral DNA transfer are VCM effects and Real Distortion guitar effects.

Sound development is so expensive that Yamaha must reuse sonic DNA. It simply cannot afford to fund two independent lines of sound development. As long as the waveform quality is high — and it is — sharing is good for all of us. It spreads out the cost of sound development over a larger number of units and customers. I honestly don’t begrudge the inclusion of some musical style or instrument voice which I will likely never use. If someone else’s purchase helps me to make my kind of music, then I don’t mind paying it forward a little bit.

I don’t have any inside knowledge, but sound development at Yamaha seems to be a continual process. The next top-of-the-line (TOTL) taps into the latest results. Expect larger, detailed waveforms and more articulations in future Montage voices. Also, stereo doesn’t rob polyphony anymore and there will be wider use of stereo waveforms.

So, yes, I would expect the newest voices from Genos to eventually appear in the Montage series: C7 acoustic piano, resonator guitar, Strat, Revo drums, Mega Voices, etc. We haven’t seen the Data List for the Genos as yet, so it’s hard to do a detailed analysis of what’s new in Genos above Montage. Would Montage voices be programmed differently? Sure, Montage and Genos are different platforms serving different needs.

I think it’s safe to say that there will be a re-spin of the Montage hardware sometime. When? That’s on Yamaha’s secret road map. Like the Genos, the Montage sound engine is scalable and can grow into new shoes, so to speak. Everything else in the crystal ball is vapor.

Beyond all that, I see a revenue opportunity for Yamaha by providing new waveforms, voices and related content through Yamaha Musicsoft. If I had a TOTL synth with expansion memory, I would be willing to pay for a sonic upgrade. I currently play a “lowly” MOX6 without expansion memory, so I’m looking for a new platform — either Montage or Genos — based on my musical needs, goals and process.

A most useful paragraph

Here is the most useful paragraph that I’ve read all week. It’s taken from the October 2017 issue of Sound On Sound magazine. Hope it helps you, too.

“These days, many studio engineers create their mixes with a compressor and an EQ sitting across the master stereo bus, whether in their console or DAW software. With the compressor set up to deliver maybe 2-3 dB of low-ratio compression and the EQ adding a gentle boost to the low and high frequencies (and/or slightly scooping the mid-range), the intended result is an enhancement of a mix’s energy and excitement that approximates the effect of that part of the mastering process.”

Genos quick hits 1

Posted on October 19, 2017 by pj

Just a few quick Genos™ hits to get the day started.

Thanks for Gerard on the PSR Tutorial Forum and Frank at Audioworks CT, we have the Yamaha Genos Product Guide. This is a slick brochure put out by Yamaha Europe and went out to dealers. A lot of the information is known, but the brochure is more in tune with a professional product launch.

In a small measure of thanks for the product guide, I’d like to slip in a shameless plug for Frank and Audioworks CT. When the Tyros 5 was released, I tested the T5 at the Audioworks store. Eventually, I bought my Yamaha PSR-S950 from Frank. Overall, an excellent customer experience. Frank specializes in arranger workstations and gigs with gear.

We’re still waiting for the Genos Data List PDF. In the meantime, I will update the list of new Genos voices and styles in my earlier post.

Last week, I re-recorded several MIDI backing tracks to WAV audio. Silly me, I had recorded and converted these to MP3 format the first time around. Worse, I deleted the intermediate WAV files in order to save space.

This task gave me a chance to listen critically to the tracks. I quickly got tired of the monotonous TAT-TAT-TAT of the snare drums. Give me Revo drums, please! I definitely foresee Revo drums in the Montage future, too.

After freezing MIDI backing tracks to WAV audio, I play over the audio. Which leads me to a major concern with respect to the assignment of DSP effect units to Genos song parts. Yamaha assigned 16 DSP units to the MIDI song parts, one DSP to each keyboard part, one DSP to the microphone, and one DSP to each style part, etc. for a total of 28 insertion DSP effects.

The 16 DSPs assigned to the MIDI song parts don’t do much for me once I freeze MIDI to audio. So, I’m wondering if those DSP units could be reassigned? Ideally, Yamaha would allocate the DSP units dynamically out of a resource pool. A dynamic assignment (or even a manual reassignment) might free up enough DSP units to implement Seamless Sound Switching (SSS) on Genos.

In SSS, one needs to have reserve DSP units in order to switch to a second voice without a glitch. The Montage SSS scheme effectively forces the voice programmer to reserve adequate DSP resources for the second voice. Seamless Sound Switching is a high demand, user want. I’d love to see Genos SSS in a future update.

Keep playin’ and havin’ fun!

Genos has landed

Posted on October 18, 2017 by pj

Thanks to Frank at Musik City for a video showing the Genos™ user interface in action. Aside from seeing the Genos UI, the screenshots reveal a number of new styles and voices. With respect to the styles, some of the new styles may be a reworking of a previous Tyros 5 style. We’ll see and hear as soon as we can test.

We already know about the CFX concert grand, C7 acoustic grand, steel acoustic guitar, resonator guitar, electric pianos (from the Montage), Kino strings, and Revo drums. New to the list are accordians, synths, and Super Articulation 2 (SArt2) cellos.

Funksters, rejoice! There is an SArt2 Baritone Sax. Excuse me while I put my shades on. 🙂

A few lucky people in the United States have received a Genos. Currently, firmware version 1.02 is shipping. It’s still early days.

List of new Genos styles and voices

Updated: 24 October 2017 AM

The “JS” in a voice name means “Try the joystick!”

Genos new R&B styles
  Mr. Soul
  SuperGroove

Genos new 80s RetroPop
  80sMonsterHit     80sClassic6-8
  80sTeenDisco      80sFunkIcon
  80sPopDiva        80sRetroDisco
  80sEuroPop        80sBritishPop
  80sSynthPop       80sSynthDuo

Genos new Pop styles
  SkyPop            SongwriterBallad
  KissDancePop      UnpluggedBallad
  BoyBandPop        6-8GuitarBallad
  CinematicPop      12-8PopBallad
  BritishDancePop   EpicDivaBallad

Genos new Rock styles
  80sClassicRock    IndieRock
  HighRoadRock      Summer8BeatRock
  70sHardRock       80sEdgyRock
  70sShuffleRock    80sRockDiva
  70sStraightRock   60sBritishSoul
  60sRockGuitar

Genos new Dance styles
  PartyAnthem       HardTrance
  Reggaeton         EDM Anthem
  DubStep           Slow'n'Swingin'
  DangerDance       ChartEDM
  ElectroPop

Genos new styles
  BigBandCrooner    RomanticMovie (Free Play)
  LushBallad        BlockbusterTV
  NashvillePop      AcousticBluegrass

Genos new drum kits (including Revo)
  RockDrumKit       JazzBrushExpanded
  PopDrumKit        AfroCubanKit
  VintageOpenKit    BrazilianKit
  VintageMuteKit    PopPercKit
  JazzStickKit      VocalBeatBox

Genos new woodwind voices
  PopSopranoSax SArt2        SoftAltoSax SArt2
  AltoSax SArt2              SmoothTenorSax SArt2
  FunkAltoSax SArt2          BreathyTenorSax SArt2
  BigBandAltoSax SArt2       BigBandTenorSax SArt2

  BaritoneSax SArt2          FunkBaritoneSax SArt2
  PopOboe SArt2

Genos new acoustic piano voices
  CFX ConcertGrand SArt      CFX WarmPad SArt
  CFX StageGrand SArt        CFX Shimmer SArt
  CFX AmbientGrand SArt      CFX CocktailGrand SArt
  CFX TwoOctaves SArt        CFX PadProduction SArt

  70sBalladUpright SArt      UprightTwoOctaves SArt
  HonkyTonkUpright SArt      ChilloutUpright SArt

Genos new brass voices
  FlugelHorn SArt2

Genos new 70s EP voices
  70sSuitcaseClean SArt      70sSuitcasePan SArt
  70sSuitcaseAmped SArt      70sSuitcaseTremolo SArt
  70sSuitcaseWarm1 SArt      70sSuitcaseWarm2 SArt
  70sSuitcasePhase SArt      70sSuitcaseAmbienceEP SArt
  70sSuitcaseBallad SArt     70sSuitcaseMeditationEP SArt

Genos new string voices      
  KinoStrings SArt           KinoStringsWarmVc SArt
  KinoStringsWarm SArt       ClassicalCello SArt2
  KinoStringsLow SArt        PopCello SArt2
  KinoStringsSlow SArt       SeattleViolins SArt
  KinoStringsNatural SArt    SeattleCellos SArt
  KinoStringsViolins SArt
  KinoStringsViolas SArt
  KinoStringsCellos SArt

Genos new acoustic guitar voices
  SteelAcousticFinger SArt   ResonatorSlapBack SArt
  SteelAcousticPick SArt     ResonatorBluesAmp SArt
  SteelThumbPick SArt        ResonatorMuteVel SArt
  ResonatorGuitar SArt       

Genos new electric guitar voices
  50sVintageRock             50sVintageSpring
  50sVintageDelay            
  50sVintageWarm             
  50sVintagePure             
  50sVintageAmp              
  50sDriveWah

  60sVintagePalm             50sVintageSolo
  60sShadowMute              50sVintageStage
  60sCountryMute             50sHeavyRock
  60sFunkPick                50sDriveWahWah
  50sVintageFull             50sVintageBlues

  60sShadowedLead SArt       PedalSteelGuitar SArt
  60sRockHero SArt

Genos new bass voices
  ActiveBassFinger
  ActiveBassF.Mute
  ActiveBassPick
  ActiveBassP.Mute
  ActiveBassSlap

  80sArpPulseBass            VeloTaureanBass
  80sSynthPopBass            80sUnisonBass
  80sSeqBass                 Powerdrone
  80sArnoldBass              BPF Buzz JS (replaces MW)
  80sRetroPulse              Wobble JS (replaces MW)

Genos new accordian voices
  SuperMusette
  SteirisheHarmonika
  BajanAccordian             
  ScotsAccordian             
  SteirisheHarmonika         

Genos new synth voices
  80sSmallPulsePoly          HyperTrance
  DanceSurvivor              TranceGates
  80sPolyPop                 80sUnisonFat
  PowerOfEmotion             PizzyDanceChords
  SinoSphere                 MiniClassicSoft
  GreenFlash                 80sDreamyVox
  80sDreamStrings

The future looks bright

Posted on October 16, 2017 by pj

After reading the owner’s manual and watching the first demonstrations, it’s clear that the Yamaha Genos™ is a beautiful face-lift over the Tyros series, but where is the sonic breakthrough?

As usual, the answer was right in front of my face all along. First, a few facts and figures:

    Feature                        Tyros 5    Genos
    ---------------------------    -------    -----
    Mega Voices                       54        82
    Super Articulation voices        288       390
    Super Articulation 2 voices       44        75
    Live voices                      138       160
    Articulation buttons               2         3

Back before the specifications were officially announced, I saw a leaked version of these specs. Given the big leap in Mega Voice (MV), Super Articulation (SA) and Super Articulation 2 (SA2) voices, I didn’t think the leaked specifications were credible. Now, I believe.

In short, the new tone generation hardware in Genos enables a very large SSD-sized waveform memory capable of holding all of the waveforms needs for the boost in MV, SA and SA2 voices. The end result is greater musical expression, detail and realism for both the Genos player and audiences.

This blog takes a focused look at Mega Voice, Super Articulation (1 and 2), and why the “great leap forward” is possible in Genos. For PSR/Tyros purists, I hope that you don’t mind my shortened abbreviations for Mega Voice, etc. The short abbreviations are much easier to type without extra punctuation marks.

Background information

MV, SA and SA2 are the trinity of highly detailed, expressive Yamaha voices. All three kinds of voices are based on Yamaha’s sample playback technology AWM2 (Advanced Wave Memory). Super Articulation 2 is based on Articulation Element Modeling (AEM). Both AWM2 and AEM are covered by many Yamaha patents.

Yamaha did not introduce these voices in one fell swoop. Mega Voices were the first to appear. A Mega Voice divides a voice into two or more velocity ranges and assigns a different waveform to each range. A trumpet voice, for example, is divided into:

    Velocity range    Waveform
    --------------    ----------------------
         1 - 20       mf trumpet
        21 - 40       f trumpet
        41 - 60       ff trumpet
        61 - 90       Legato
        81 - 100      Straight
       101 - 110      Shake
       111 - 120      Falls
       121 - 127      Glissando up

MIDI notes above C6 and above C8 are mapped to valve noise and breath noise, respectively. For other examples of Mega Voices, see the Mega Voice mapping table in the Tyros 5 Data List file for details. (Also, learn how to create a Mega Voice using Yamaha Expansion Manager.)

The first three ranges and waveforms correspond to velocity switching as we know it. The second five ranges correspond to articulations as we know and love them in software instruments. The articulations and noises are the sonic sweeteners that make sequenced music sound more human and natural.

Mega Voices are intended for sequencing. They are used in arranger keyboard styles to make them sound less MIDI-ish. Unless you have the finger control of a god, you cannot reasonably play a Mega Voice through the keyboard.

But, wait a minute! What if you put some smart software between the keyboard and the tone generator? The smart software watches and analyzes your gestures (i.e., key presses, releases, button pushes, etc.), and plays either a regular note or an articulated note. This is the basic idea behind Super Articulation.

In the case of the trumpet, for example, the SA software watches the notes that you play and if you push the right articulation button while playing a note, the software selects and plays a shake instead of a regular trumpet sound. The SA software also analyzes note timing and plays a legato waveform when you strike a second key while holding the first key. SA software even responds to note intervals such as playing a glissando when the interval between two notes is big enough.

In the end, Super Articulation makes Mega Voice articulations intuitively playable. I thoroughly enjoy playing the SA voices on my PSR-S950. I don’t have too think to hard at all — just let it rip as I hear it in my head.

Montage and late model Motif- and MOX-series synthesizers implement Expanded Articulation (XA). Take a look at my deconstruction of the Tenor To The Max voice.

Super Articulation 2 takes SA up another notch. Real musical tones are not discrete sonic events. Tones tend to blend together due to the characteristics of the musical instrument itself and/or playing technique (e.g., legato). SA2 performs a digital blending between notes by analyzing gestures and selecting the appropriate waveform from a very large database of waveform segments. Broadly speaking, these segments belong to three categories:

Head: Attack portion of the sound
Body: Main body of the sound
Tail: Release portion of the sound

Consider two notes where the first note is detached and the second note is legato. SA2 plays the head segment for the first note, sounding the attack. This is followed by the body of the first note. SA2 does not play a head for the second note. It blends the body of the first note into the body of the second note. When the second note is released, SA2 selects and plays a tail for the second note.

All of this blending is computation heavy and is very sensitive to timing and latency. The technology behind SA2 is Articulation Element Modeling (AEM). AEM is actually a deep subject and is patented. (See my related post about Real Acoustic Sound.)

Technical breakthrough, sonic breakthrough

Folks who are familiar with software instruments and sound libraries know that all of this comes with a cost. Sample libraries for orchestral instruments are enormous because there are so many different ways to bow, pluck, strike and generally mess with acoustic instruments. Tens and even hundreds of gigabytes are needed to store the highest quality sample libraries. Then, one needs to have a fast streaming device like an SSD and a computationally husky CPU to play the samples without a glitch or hiccup.

Before Montage and Genos, Yamaha’s mainstay tone generator (TG) integrated circuit (IC) was the SWP51L. This venerable chip carried the load in Motif, MOX, CP, Clavinova, and other mid- to high-end Yamaha products.

Like all things electronic, the SWP51L’s time eventually came and went. The SWP51L communicates to waveform memory over a CPU-like bus with a fixed width address. The SWP51L is limited in three ways. First, the fixed width address is not big enough to address the very large sample library needed to support today’s articulation-heavy voices. Second, the address bus cannot be (easily) made wider. Third, the bus protocol is not directly compatible with relatively inexpensive commodity NAND flash memory. Conclusion, the SWP51L does not scale to a big waveform memory.

The Montage and the Genos deploy the new generation SWP70 tone generator. Unlike the SWP51L, the SWP70 is compatible with commodity NAND flash memory — the same kind of memory used in solid state drives (SSD). The Open NAND Flash Interface (ONFI) bus protocol — and the Genos — is scalable.

Thus, Yamaha is finally free to expand waveform memory to sample library scale.

People make much of “SSD, SSD, SSD!” SSDs use a SATA bus for communication, a bus that can become a bottleneck in itself. Yamaha have found a way to integrate SSD functionality into the SWP70 without the need for a SATA bus. The integration promises greater speed (i.e., memory bandwidth) without the cost and latency of a SATA bus. This design approach is patented. Please read one of my earlier posts about the SWP70 for the gory technical details. Hope you know a bit about computer architecture before diving in!

I’ve also speculated about the role of the SWP70 in the implementation of the Genos file system. This post is highly speculative and has not been verified by reading the Genos service manual.

What does this mean for the player?

The bottom line for the player and audiences is rich sound filled with detail and realism, thanks to big waveform memory, AWM2/AEM synthesis and Yamaha’s sound development expertise. Big waveform capacity and the new mono/stereo tone generation channels in the SWP70 also mean greater use of stereo samples (“Live voices” in PSR/Tyros-speak.)

Please look at the chart at the beginning of this article. No previous generation-to-generation Tyros upgrade has had such a big jump in the number of Mega Voice, Super Articulation and Super Articulation 2 voices. It can only get better from here as the SWP70 is the Yamaha platform for the next 8 to 10 years.

The Genos promises to be an expressive instrument which will be fun to play. The knobs, sliders and articulation buttons afford a great deal of real time control. I can’t wait to play one of these!

Longer term, what do the technical breakthroughs hold for the Montage series? You ain’t seen or heard nothin’ yet.

Creating a Mega Voice in YEM

Posted on October 13, 2017 by pj

With all of the Genos™ hoopla, let’s not forget about technique and skills! A few interesting questions popped up on the PSR Tutorial Forum and I’m reposting my answers here.

Today’s blog describes how to create a Mega Voice for PSR/Tyros using Yamaha Expansion Manager (YEM). With this background information in mind, I go on to discuss maximum polyphony in AWM2 and how to count voices against maximum polyphony.

The discussion has a PSR/Tyros focus, but a lot of the information applies to Motif, MOX and Montage, too. If you want to learn more about the Yamaha AWM2 voice architecture, I recommend reading the first chapter of a Motif- or Montage-series reference manual and the corresponding synthesizer parameter manual. (Download these manuals from the Yamaha manual library.)

Creating a Mega Voice in YEM

Regular voices are the usual MIDI voice: 128 velocity levels and only one basic sound. For example, nylon guitar is just the pitched, melodic sound of the notes either louder or softer depending on note velocity.

Mega Voice guitars (and other Mega Voices) are different. Please look at the Mega Voice Map starting on page 16 of the Tyros Data List PDF.

Let’s take a look at the Mega NylonGuitar voice. For MIDI notes B5 and below, the MIDI velocity is broken into eight (8) ranges:

    1- 20 Open soft
   21- 40 Open med
   41- 60 Open hard
   61- 75 Dead
   76- 90 Mute
   91-105 Hammer
  106-120 Slide
  121-127 Harmonics

Each range plays a different kind of sound. So, the MIDI velocity determines which guitar sound. Then, the velocity within that limited range determines how loud it will be.

Example 1: MIDI note A4, velocity 38 makes an Open Med guitar sound which is loud.

Example 2: MIDI note A4, velocity 2 makes an Open Med guitar sound which is quiet.

Example 3: MIDI note A4, velocity 110, makes a Slide guitar sound.

Now, let’s look at the last two columns in the Mega Voice map, again, for the Mega NylonGuitar voice. For MIDI notes between C6 and B7, the Tyros plays a Strum noise. The velocity in this case determines the Strum noise loudness over the full range 1-127.

For MIDI notes above C8, the Tyros plays a Fret noise. The velocity determines the fret noise volume and is full range 1-127.

Example 4: MIDI note D8, velocity 127 plays a very loud fret noise.

Put this knowledge into action with YEM

Now you need to figure out how to do this using the voice editor in Yamaha Expansion Manager (YEM). Each voice has up to eight elements. Think of each element as a mini, controllable synthesizer.

You will need one element for each of the velocity ranges that form the main body of your Mega Voice. In the case of the Mega NylonGuitar voice, that’s eight elements!

In YEM, build one element at a time. Layout the samples for one velocity range of the many body. You may have one waveform or you may have several waveforms. Each waveform occupies a key range. Do not map any waveforms onto the keys C6 and above (yet). These keys are reserved for the noise notes.

When you select a waveform belonging to an element, YEM highlights the color and displays eight resizing dots on the edges of the waveform. Use these dots to resize the waveform. Moving left or right changes the key assignment for the waveform. Moving an edge up or down changes the lower or upper limit of the velocity range to be assigned to the waveform.

If you have a lot of samples, be prepared to do a lot of work! Now you’re learning how much work Yamaha puts into voice development!

Once you have assigned the waveforms (samples) for the main body of your new voice, you can work on the noise notes, that is, any keys C6 and above.

Select the first element. Assign the waveforms for the noise notes to the keys C6 and above. The actual layout is up to you, but you must use only the keys C6 and above.

If your noise notes have only one velocity range, 1 to 127, then you must set the velocity range for only those waveforms (1 to 127). If your noise notes have two or more velocity ranges (not recommended), then you must use more than one element.

So, you can see that YEM has enough editing power to create a Mega Voice. Be prepared to study carefully how Yamaha voices are constructed. Please don’t expect to just jump in, clap your hands, and be finished. I regard Mega Voice development as a fairly advanced, expert job. If you haven’t created a voice before using YEM, then I suggest trying something simple until you understand elements, waveform layout across keys, and velocity ranges.

Counting voices against maximum polyphony

Now that you’re schooled in voice structure, it’s a good time to discuss maximum polyphony and counting voice elements against maximum polyphony.

This has always been a somewhat confusing topic because of the way polyphonic voices are counted.

As I mentioned above, a Tyros or Motif or Montage (AWM2) voice consists of up to 8 elements. Assume that only the RIGHT1 part is enabled and thus, only one Tyros voice is enabled. When a key is struck, the AWM2 engine determines the active elements and assigns each active element to a physical-level, hardware tone generation channel. One or more elements may be active simultaneously for a given note under the assumption.

Assignment and channel use is additive. If RIGHT1 and RIGHT2 are enabled (i.e., two layered voices), then there are one or more active elements from the RIGHT1 voice and one or more active elements from the RIGHT2 voice. This is why layers chew up polyphony.

The number of tone generation channels determines the maximum number of active tones playing at any time — the maximum polyphony.

Be prepared to be confused!

Even if all eight elements are defined in a Mega Voice, not all eight elements may be active at a time. One to eight elements may be active depending upon the incoming MIDI note and the element programming (i.e., the velocity range and note range for each element.) When the synthesis engine gets a MIDI note (consisting of a MIDI note number and velocity), it decides which elements to play. If only one element matches, then only one polyphony voice is used up. If two elements match, then two polyphony voices are used up, and so on.

Thus, depending upon the combination of note ranges and velocity levels, a voice may use anywhere from one to eight voices of polyphony. It all comes down to the particular design (programming) of a user voice.

If you’re not confused yet, hold on, there’s more. In the past, a stereo voice would use two tone generation channels while mono uses one channel. The left waveform is assigned to an element and the right waveform is assigned to its own element. Montage and Genos have the new tone generator, the SWP70. The new tone generation hardware supports 128 mono/stereo voices (channels) of polyphony. That is, stereo elements get mapped to a stereo channel. This is a big deal because it allows greater use of stereo waveforms without cutting too deeply into the available polyphony.

Think like a coder

By now, if you’re a programmer, you’re thinking of pseudo-code somthing like:

    if ((MIDI note number >= lowest key in key range) &&
        (MIDI note number <= highest key in key range) &&
        (MIDI note velocity >= lowest velocity in velocity range) &&
        (MIDI note velcotiy <= highest velocity in velocity range))
    {
        Generate the tone for the MIDI note
    }

This conditional statement summarizes what I discussed earlier.

As usual, there's more.

The AWM2 synthesis engine defines and evaluates other conditions:

Detached (non-legato) or legato
Articulation button ON or OFF
Jump in note interval less than one octave

Motif and Montage people will recognize the first two conditions as Expanded Articulation (XA). PSR and Tyros people will recognize all three conditions as part of Super Articulation (SA). These additional conditions also control element triggering. Think about extending the pseudo-code's condition with other conjunctive terms.

The Motif and Montage voice editors expose the XA conditions. Yamaha Expansion Manager does not expose these conditions. Thus, it's not possible to create Super Articulation voices using YEM.

Genos news from Germany

Posted on October 10, 2017 by pj

Heidrun Dolde is a musician, performer, composer and music educator in Stuttgart, Germany. Heidrun has a wonderful Web site dedicated to technique and workshops with an arranger keyboard focus.

The epicenter for the Genos™ roll-out is Rellingen, Germany, So, it makes sense that Heidrun would be right in the middle of the action. She collected questions concerning Genos from members of the European Yamaha forum and sent the questions to the Yamaha team in Rellingen. She has summarized the answers in a PDF available here: http://heidruns-musikerseiten.de/keyboard/vergleiche.

I am in Heidrun’s debt for all of the information in this post. I cranked her PDF through Google Translate and used a little bit of my “viewgraph German” to learn more about Genos. Here are a few items that I have not seen prominently in English language sources. I wrote a few editorial comments, which appear between square brackets “[]”. I’ll take the heat for any errors.

New voices and drum kits

There are 14 “Revo” drum kits including: Rock Drums, Pop Drums, Vintage Open, Vintage Muted, Jazz Sticks, Jazz Brushes, Vocal Beatbox. The drums are recorded with room ambience. [I’ve been freezing MIDI songs to WAV audio on PSR-S950. I desperately need the wave-cycling in Revo drums.]

New voices include:

Revo! Drums
Resonator guitars (Dobro)
Flugelhorn and other brass sounds
Pedal Steel (authentically playable because only the lower part of a chord responds to pitch bend)
CP-80 (e.g., for classic Freddy Mercury and Foreigner songs)
Many strings of a large orchestra to cello, viola, violin in a small ensemble
New piano sounds (from Montage)
Many synth sounds (from Montage)

[Country and folk players appear to be big winners with Genos. Dobro, pedal steel, new acoustic steel guitars. Wow!]

There are new OTS for all 550 styles. [Yamaha usually updates styles to use the latest voices. They outdid themselves this time.]

Layers, splits and editing

Up to three voices can be layered. You can not control voices [in a layer] by velocity level as with a synth.

You can create up to 3 voice areas next to each other on the keyboard by splitting split points (Left Voice, Right Voice 1 + 2, Right 3).

Onboard sound editing is through “Voice Set”, which influences the overall sound of a voice (filter, envelope, effects, etc.) In addition, there is sound modification in live mode (“Live Control”) which are made by knobs and sliders. The OLED sub-display shows the parameter value changes in real time.

If you want to get into detailed voice editing, the new Yamaha Expansion Manager (YEM) will provide advanced ways to change the individual components of Voices. YEM 2.5 will be released in November 2017. Information about voice editing will be available then.

DSP effects

There are three system-level effects automatically called by MIDI files or styles: Reverb, Chorus, and DSP 1.

Of the 28 insertion effects, eight DSPs are reserved for styles. Each part has its own separate DSP.

The remainder of the insertion effects have a fixed assignment. Voice parts LEFT, RIGHT1, RIGHT2, RIGHT3 can each have an insert DSP (+ Part EQ) and are routed to the system reverb and chorus effects. Song parts 1 to 16 each have a separate insertion effect. Song parts 1 to 16 and Style parts 1 to 8 can be routed to a single variation effect (effectively forming a 2 DSP insert chain).

Multipads do not have their own DSP effect.

Operating system and user interface

A maximum of 2500 files can be in a folder. MIDI files can be a maximum of 300 KB. [Several people on the European forum made note of the 300KB limitation. EDM, in particular, makes heavy use of MIDI continuous control (CC) and the 300KB limit may be a deal breaker. Yamaha, please take note.]

Playlists work best with Songbook+. An entry can be linked directly without having to know the MSB / LSB of the Voice. [Sounds like there will be tight(er) integration between Songbook+ and Genos. Songbook+ is free through the US Apple app store, but there is a 15 song limit. Unlimited Songbook+ is an in-app purchase. I’ve already downloaded Songbook+, but haven’t had the time to try it.]

Genos takes about 20 seconds to power up the operating system (as of October 2017).

[I anticipate faster expansion pack loading time. Blake Angelos (Yamaha) reported that Montage load times were measured at 6 to 7 times faster than Motif XF. For example, a 500MB load took 5 minutes on a prototype model. Like Montage, Genos incorporates the new tone generator hardware and flash interface.]

Controllers

The Yamaha MFC10 foot pedal is supported by Genos. The settings are made via Menu> MIDI> External Controller.

The front panel gateway buttons are:

Home: Main Display
Menu: Basic
Style: Styles
Voice: Instruments
Songs: MIDI and audio files
Playlist: Repertoire list

[I love that name, “Gateway.”]

MP3 format

Genos supports MP3 audio playback with lyrics. Given an MP3 file with the appropriate embedded information, the Genos provides a karaoke function with song text and chord display. The MP3 formats are Midiland Lyrioke (DKE format, fits all Midiland players) and MP3 + G. Heidrun and folks tested CDG format.

Both Genos song players can display MP3 with song lyrics.

Internal file storage

Geno has no internal hard drive and no SSD drive. Hard drives are vulnerable to fairure due to their mechanics. The moving parts in a hard drive also affect the lifetime of a hard drive. There is a solid-state user memory (= Flash ROM) with 58 GB of memory.

[People are having a hard time getting their minds around this one. Wot? No hard drive, no SSD? What is it? Yamaha have cleverly used the flash memory attached to one of the tone generators as explained in my post. Yes, it’s flash, but it will be a heck of lot faster than USB flash. Trust me.]

Appreciation

I just want to thank Heidrun, again, for collecting questions and answers, and summarizing the responses. She did a superb job!

Vielen Dank!

Genos: After the fireworks

Posted on October 6, 2017 by pj

So, how do I feel about Genos now that the Genos manuals are rolling out and emotions have cooled down?

The Yamaha Genos™ is a significant update on the Tyros 5. The brand new user interface (UI) should be easy to navigate through the brand-spanking new touch screen. The assignable knobs and sliders are very welcome, and probably give some Montage owners FOMO (fear of missing out). The sound set has gotten the usual and expected boost: CFX piano, C7 piano, electric pianos on par with Montage, new acoustic guitars, and so on.

Scratch the surface of the new UI, however, one finds few feature enhancements. The new Playlist capability replaces the Music Finder Database (MFD). Yamaha are in competition with Korg’s Songbook and only real hands-on experience will determine who has the edge.

The lighter weight is definitely appreciated as well as the modern stage styling. Yamaha have chosen to offer Genos in a single 76-key model. The 76-er weighs less than the previous 61-key Tyros 5 and that’s all to the good.

Before I discuss a few specific points, I want to describe how I feel: methodically enthusiastic. Huh?

When I buy a new keyboard, I think carefully about need — what would improve my experience and skills as a musician and what would improve the experience of those for whom I play. I do not currently perform with my Yamaha PSR-S950 arranger. Gig-wise, I can cover what I need to cover with a sample-playback synthesizer. I need section/solo orchestra strings, woodwinds and horns. I need B-3 organ and pipe organ. The Yamaha MOX6 — my main gig instrument — is sufficient in this regard.

I do play the S950 as a practice instrument. I also have aspirations of performing as a one man band (OMB). I would be very happy to have a single instrument that fulfills gigging, practice and OMB situations.

In terms of sound, I’m ready for a major update. The MOX6 and the S950 sounds are roughly the same vintage as the Motif XS, first released in 2007. That’s ten years. As a car owner, I tend to hold and drive the same car for ten years. Then I realize how far the technology has progressed and update. My attitude is the same for instruments. I prefer to hold and play an instrument for five years or longer, learning it in depth. I make an exception if the front panel buttons are worn and broken. 🙂

At this point, I know for sure that I want a better keyboard action such as the FSX action in Montage and Genos. This is similar to moving from a “student model” sax to a “pro” sax. I think the better action will help me as a player.

If you stuck with me this far, you probably realizing that I’m considering either the Montage or the Genos as my next gig and home ax. Even though I respect the Kronos, its orchestra instruments are not as expressive as Yamaha’s. Roland seems to have given up on orchestral instruments. After a quality/reliability issue with Kurweil, I’m off of them for life.

So, I am methodically enthusiastic about the Genos. It’s Genos vs. Montage; Godzilla vs. Mothra. Is the Genos value proposition sufficiently atractive that I will pay its premium price? That comes down to the playing experience and workflow. To be decided over the coming months.

I’m reluctant to give anyone advice. Every musician must carefully weigh their needs, the Genos value proposition and the Genos price. I will say that the Montage, Kronos, Tyros 5 and PA4x remain very fine, capable instruments. The PSR-S970 is no slouch, either. I tend to skip a generation before updating. Should you? Can’t say.

Drawbar organ

The Genos drawbar organ engine is substantially the same as Tyros 5, and S950, for that matter. The drawbar organ page is a skeuomorphic representation of the drawbars, rotary speed switch, etc. When Yamaha adopted a touch screen, thank heavens they added real sliders for drawbar control. This is doing it right.

I play the bars constantly. When I test drove a CVP-709 touch screen piano, the virtual, on-screen drawbars were impossible to play. Kudos for adding real physical controls to the Genos.

Also, thank you for porting the new Montage rotary speaker effect to the Genos.

Speaking of DSP and control, I have another suggestion for Genos 1.1. Many DSP effect algorithms have a parameter which can be controlled from an assignable controller (e.g., AC1). The Genos is too limited in this regard. Any physical controller — including a foot pedal — should be able to tweak a controllable DSP parameter in real time. Currently, for example, a foot pedal can only control the WAH effect. One should be able to control any DSP algorithm with a controllable parameter.

Ready for the studio?

Quite a few pros immediately noted the lack of balanced outputs and asked “Is Yamaha serious about attracting pros to the Genos?” Another question often raised is, “What happened to PAC?” The S/PDIF digital output is good enough to connect to home audio equipment, but the professional studio (and stage) expects balanced outputs.

Another missing feature is audio over USB and/or DAW integration. Fortunately, these features can be added through a software update; balanced outputs cannot.

Really ready for EDM?

Now, I’m not really an EDM person. I like down-tempo and I’m hoping to compose down-tempo tracks once the snow flies and the weather keeps me in. A few common themes recur in on-line forums.

The Genos adopts arpeggios and arpeggio control features from the PSR-S970. True EDM people are expecting more, however. At the very least, Yamaha need to add user-defined arpeggios, maybe in release 1.1. User-defined arps were a much-requested item for the Montage punch-list; Genos is no different.

Yamaha, if you’re listening, there is an active thread about arpeggios in the Genos section of the PSR Tutorial Forum. Please read through it.

If you want to attract younger composers and players to Genos, Yamaha need to be bolder and faster.

Built-in expansion memory

Yamaha are committed to built-in flash expansion memory which cannot be expanded by the end user. Not to put too fine a point on it, the flash memory expansion modules are dead. If you’re getting rid of your Tyros, Motif, or MOXF, get rid of the modules, too. If you’re looking for a bargain Tyros 5, Motif XF or MOXF, be sure to get flash expansion modules thrown into the deal. (If you’re buying a MOXF, keep an eye on the Yamaha promotions web page.)

As I explained in another post, I believe that the Genos internal file system resides in the same physical memory unit as the user expansion waveform memory. The total capacity of this memory is 64GB and is partitioned into the 58GB internal file system and the 1.8GB voice expansion memory. If 1.8GB is too small, I wonder if Yamaha could be persuaded to repartition the memory and make the voice expansion memory bigger (at the expense of file system size)? This is all speculative, of course.

Audio styles

Audio styles have not disappeared — just deemphasized. Audio styles were not universally popular. So, audio styles have been dropped from initial factory content and will be provided at a later date. Users will be able to load audio styles, if they so desire.

I still believe that Yamaha will introduce full audio styles, that is, styles with melodic parts that follow the current chord type and root. When Yamaha re-launch audio styles, they will be “audio styles done right.” I think they learned a lot from the S950, S770, S970 and Tyros 5 in this regard. Release date? Who knows?

Genos internal memory: A speculation

Posted on October 3, 2017 by pj

Update: 23 December 2017

The article below illustrates the danger of speculation based on a few specifications. It is so easy to convince oneself that “This must be the way they did it!”

Thank goodness for service manuals.

I will eventually write a longer description of the Genos™ compute complex. Here’s a few facts to tide you over:

The main CPU is a 1GHz TI AM4376 Sitara Cortex-A9 ARM processor (AM4376BZDN100).
There are two SWP70 tone generator (TG) integrated circuits.
The master TG has 2GBytes (physical) of wave memory (Winbond W29N08GVSIAA).
The slave TG has 4GBytes (physical) of wave memory.
The internal memory is a Toshiba 64GByte eMMC device (THGBMGG9T4LBAIR).

The eMMC device is where you’ll find the “58GByte internal memory.” The eMMC is connected to one of the ARM’s two MMC interfaces.

The Montage’s main CPU is an 800MHz TI AM3352 Sitara Cortex-A8 ARM processor (AM3352BZCZ80). Whose the big brother and the little tag-along? 🙂

Everything about the following speculation (below) is utterly wrong. That’s why I try to explicitly label speculation and fact when writing.

A (Discredited) speculation

First, you have to get the mule’s attention.

Yamaha Genos™ hasn’t hit the streets yet and here is a speculative article about its hardware design…

I’d like to thank Kari V., Mihai and Joe H. on the PSR Tutorial Forum for getting this mule’s attention. They deserve the credit.

Spex

Here are a few Genos specifications that drew curious looks:

Polyphony: 256 (max.) (128 for Preset Voice + 128 for Expansion Voice)
Voice expansion memory: Approximately 1.8GBytes
Internal memory: Approximately 58GBytes

Normally, a Tyros has a large hard disk inside for bulk storage. The hard drive contains a file system to hold style files, song files, text files and a whole lot more. The Tyros 5 shipped with a 500GB hard disk drive. Tyros 5 internal memory — some form of non-volatile flash — is spec’ed at approximately 6.7MBytes. Yes, megabytes.

Word from the demonstrations is that the Genos has neither a hard disk drive nor a solid state drive (SSD). Thus, “Internal memory” is not directly user expandable or upgradeable. Eliminating the hard disk drive, the bracket and access door makes good sense because it reduces weight and chassis complexity. SSDs are still a little pricey for a cost-sensitive manufacturer like Yamaha. If it’s not a hard drive and if it’s not an SSD, then what is it?

Next, what’s up with that polyphony spec? 128 voice polyphony when you play preset voices only and 128 voice polyphony when you play a voice from user voice expansion memory? That’s rather unorthodox.

The high-level view

This is where the Yamaha SWP70 tone generator (TG) integrated circuit (IC) comes into the story.

The SWP70 uses ONFI-compatible NAND flash as its waveform memory. “ONFI” is the industry standard Open NAND Flash Interface. ONFI-compatible chips are the same NAND flash used in SSDs. The SWP70 caches the waveform data in a fast SDRAM just like an SSD in order to have fast, random access to samples.

Yamaha have created a tone generator IC that integrates an SSD-like flash and cache controller. This design eliminates the cost and latency of the SATA bus which normally connects an SSD within a PC or Mac.

For the hardware inclined, here’s a short speculative answer. There are two tone generator ICs each having their own ONFI flash memory. One TG and flash memory (call this one “TG A”) handles factory presets. The other TG and flash memory (call this “TG B”) handles user expansion voices.

The “TG B” flash memory is 64GBytes of ONFI NAND flash. Through software, it is partitioned into a file system partition (62GB?) and a user expansion voice partition (2GB).

The file system partition contains the initial factory content (4GB). The remaining space (58GB) is the “Internal memory” quoted in the Genos specifications.

So, Yamaha engineering decided to use space in one of the ONFI flash memories for bulk storage in order to cut the weight and expense of a magnetic hard drive (heavy) or an SSD (lighter than a hard drive, but not cheap).

If this is true — if — then there are some positive implications for the future of Genos. More at another time.

Ingenious, yes. User expandable, no.

Do I know this for sure? Oh, hell no. We need a service manual. Even a visual inspection of the digital logic board (DM) might not be conclusive.

The low-level view

The notional diagram below shows some of the major interfaces to the SWP70. [Click on images to enlarge.]

The CPU bus connects the SWP70 to the main control CPU and other major subsystems that require CPU-based data and control.
The ABUS allows SWP70s to communicate with each other when more than one SWP70 is in a system.
The waveform memory (NAND flash) communicates with the SWP70 over a Open NAND Flash Interface (ONFI) bus. This open industry standard lets Yamaha use commodity flash memory for waveform ROM. Waveform memory is split into upper and lower bytes with shared control signals. This arrangement instantly doubles bus bandwidth versus a single ONFI data channel.
The Serial audio bus brings audio data into the SWP70 (e.g., from the ADC) and sends audio data to the DACs and other subsystems.

Then, the fun begins. The SWP70 has three parallel SDRAM memory channels for wave and DSP working memory.

The DSP working memory is a large, scratch-pad memory for effect computation. I believe this memory is also the working memory for Montage FM-X.
The Wave working memory is a fast, read/write data cache which holds samples after they are read from the waveform memory. Remember, NAND flash favors sequential block mode read access, transferring data on the nibble-serial ONFI bus. The wave working memory plays the same role as the data cache in an SSD storage unit.

Memory capacities vary across products depending upon target polyphony, effect workload and, of course, the sample set.

Here are capacities for the PSR-S770, PSR-S970 and Montage. All capacities are physical (i.e., raw physical storage space).

             AWM     Waveform    Wave     DSP
          Polyphony   Memory   Working  Working
          ---------  --------  -------  -------
PSR-S770     128      512MB      32MB     8MB
PSR-S970     128       2GB       32MB     8MB
Montage      128*      4GB       32MB    16MB
          * Stereo/mono

The Montage DSP working memory is twice as large as the PSR-S970 reflecting the larger number of supported effect units.

The ONFI standard is the same standard used in solid state drives (SSD). Thus, Yamaha can reap the benefit of lower cost commodity flash. The wave working memory caches data just like an SSD. The SWP70 design yields maximum bandwidth to and from NAND flash without the expense or latency of a SATA bus. Thanks to ONFI, Yamaha can increase waveform memory size by dropping in higher capacity ONFI-compatible devices. User waveform (voice) expansion memory resides in these same memory components, so one should expect bigger user expansion memory in the future as well as bigger factory sample sets.

The SWP70 reads and writes two flash memories in tandem effectively sending a 16-bit word on each ONFI bus cycle. (See diagram below.) One memory provides the HIGH byte and the other memory provides the LOW byte. The same ONFI control signals are sent to both. For people who like to trash Yamaha for not using SSD, please note that tandem access doubles the transfer bandwidth over a single ONFI data path solution. (Of course, an SSD could do the same thing.)

I’ll bet that using the ONFI waveform memory for file system access made the tone generation guys nervous. Would file system traffic rob memory bandwidth from the tone generators?

Yamaha know latency. They spend a lot of time, money and intellectual effort understanding latency and conquering it. That’s where the second waveform working memory comes into play. Samples heading to the tone generators could be held in one waveform working memory while file system data could be held in the second, separate working memory. This organization separates the memory traffic and prevents file access from disturbing the critical, must-be-predictible sample stream. When the two channels arbitrate for the ONFI bus, the sample stream feeding tone generation could be given priority.

A few quick Genos links

Posted on October 3, 2017 by pj

Just wanted to offer a few quick Yamaha Genos™ links.

If you haven’t seen the Genos demo by Martin Harris, please don’t wait any longer. Martin is one of the key Genos developers. Pay close attention! His demonstrations always hit the sweet spots in a new Yamaha keyboard. There is a no talking, all playing demonstration, too.

I also would like to draw your attention to Frank Ventresca’s blog post about the Yamaha Genos. Frank attended the Genos demo in New York City.

Full disclosure: I bought my Yamaha PSR-S950 from Frank at Audioworks CT. I met Frank when I tested the Tyros 5 at his store. He is a knowledgeable, solid guy who gigs with this gear. A good dude.

Played a Montage, again, yesterday. The Genos vs. Montage battle is alive in my mind. I’m not in a big hurry to buy, so please expect this comparison to drag out — possibly until NAMM 2018 when the “Half Monty”, MOXF successor might be announced. Oh, yeah, that one is in the works. Sometime.